In collaboration with Arlie Lambright, we have developed two new universal parts for Ikego that allow you to build several things. The Flappy Beam and the Flappy Board. A first documentation of these parts can be found on Arlie’s page. Here is an updated version of the documentation.
The parts are used in several Ikego sets here on the site. One use case is the assembly of trestles One possible use is the assembly of trestles. Documentation on this can be found below the part documentation.
Flap Board
Basic Info
- What is it: a board
- Material: strong | standard tolerance
- Dimensions: ~420mm x ~80mm x ~18mm | standard tolerance
- Holes: several holes, Ikego Grid, diameter 6mm, location see drawing
Get the part
- Buy: Available as local make
- Make: To drill the hole pattern correctly, you can 3D print a drilling template. Here is one for a board with a width of 80mm: DOWNLOAD STL.
Meta
- Introduced by: Arlie Lambright & Lars Zimmermann
- Open: Shared under IPP 1.0
- Disclaimer: This part is just a concept and not fully tested. You should not assume that it works as indicated and I am not saying that it does. I disclaim any responsibility or liability for any damage caused during the construction and use of products based in whole or in part on the concept shown here. All information is provided for your use at your own risk.
Flappy Beam
Basic Info
- What is it: a beam
- Material: strong | standard tolerance
- Dimensions: !360mm x ~80mm x ~18mm | standard tolerance
- Holes: several holes, Ikego Grid, diameter 10mm and 6mm, location see drawing
Get the part
- Buy: Available as local make
- Make: To drill the hole pattern correctly, you can 3D print a drilling template. It will make it easier to make sure the holes meet. Here is one for a board with a width of 80mm: DOWNLOAD STL.
Meta
- Introduced by: Arlie Lambright & Lars Zimmermann
- Open: Shared under IPP 1.0
- Disclaimer: This part is just a concept and not fully tested. You should not assume that it works as indicated and I am not saying that it does. I disclaim any responsibility or liability for any damage caused during the construction and use of products based in whole or in part on the concept shown here. All information is provided for your use at your own risk.
Table Top
Basic Info
- What is it: a baord
- Material: strong | standard tolerance
- Dimensions: ~990 x ~510mm x ~16mm | standard tolerance
- Holes: 4 holes, Ikego Grid, diameter 6mm, location see drawing
Get the part
- Buy: Available as local make
- Make: No instructions available
Meta
- Introduced by: Lars Zimmermann
- Open: Shared under IPP 1.0
- Disclaimer: This part is just a concept and not fully tested. You should not assume that it works as indicated and I am not saying that it does. I disclaim any responsibility or liability for any damage caused during the construction and use of products based in whole or in part on the concept shown here. All information is provided for your use at your own risk.
Trestles
1 Small Trestle
Description
Just a small trestle. With lots of opportunity to attach additional things. Height: 400mm.
Parts
- 126.1 – Flap Board, documented above ↑
- 127.1 – Flappy Beam, documented above ↑
- 082.2 – M6 Bolt 70mm
- 029.1 – M 6 round nut
Meta
- Added by: Lars Zimmermann
- IP protected: No, and not planned! (IPP 1.0)
- Disclaimer: This part is just a concept and not fully tested. You should not assume that it works as indicated and I am not saying that it does. I disclaim any responsibility or liability for any damage caused during the construction and use of products based in whole or in part on the concept shown here. All information is provided for your use at your own risk.
2 Strong Trestle
Description
Just a trestle. With lots of opportunity to attach additional things. Height: 700mm.
Parts
- 126.1 – Flap Board, documented above ↑
- 127.1 – Flappy Beam, documented above ↑
- 082.2 – M6 Bolt 70mm
- 029.1 – M 6 round nut
Meta
- Added by: Lars Zimmermann
- IP protected: No, and not planned! (IPP 1.0)
- Disclaimer: This part is just a concept and not fully tested. You should not assume that it works as indicated and I am not saying that it does. I disclaim any responsibility or liability for any damage caused during the construction and use of products based in whole or in part on the concept shown here. All information is provided for your use at your own risk.
3 Extra Strong Trestle
Description
Just a strong trestle. Starting from 700mm and extendable. With lots of opportunity to attach additional things.
Parts
- 126.1 – Flap Board, documented above ↑
- 127.1 – Flappy Beam, documented above ↑
- 082.2 – M6 Bolt 70mm
- 029.1 – M 6 round nut
Meta
- Added by: Lars Zimmermann
- IP protected: No, and not planned! (IPP 1.0)
- Disclaimer: This part is just a concept and not fully tested. You should not assume that it works as indicated and I am not saying that it does. I disclaim any responsibility or liability for any damage caused during the construction and use of products based in whole or in part on the concept shown here. All information is provided for your use at your own risk.