A bench for the ‘Flappy World’ of Ikego.
Ikego info
Ikego Parts used
- 126.1 Flap Board
- 082.2 M6 bolt 70mm
- 072.1 Spacer
- + 3 new parts, documented below ↓
Meta
- Added by: Rinaldoo Boom
- IP protected: No, and not planned!
- Local Makes: Allowed, of course. Feel free to donate 1 EUR per make to Paypal.Me/Lars2i (dedicate it to Rinaldoo)
- Disclaimer: This model is just a concept and not fully tested. You should not assume that it works as indicated and I am not saying that it does. I disclaim any responsibility or liability for any damage caused during the construction and use of products based in whole or in part on the concept shown here. All information is provided for your use at your own risk.
New parts
01 Short Flappy Beam
Basic Info
- What is it: a beam
- Material: strong | standard tolerance
- Dimensions: length is fixed! to 240mm, but height ~80mm and thickness ~18mm are subject to standard tolerance
- Holes: Several, all in Ikego Grid. For location see drawing.
Get the part
- Buy: Available as local make
- Make: No instructions available
Meta
- Introduced by: Rinaldoo Boom
- Open: Shared under IPP 1.0
- Disclaimer: This part is just a concept and not fully tested. You should not assume that it works as indicated and I am not saying that it does. I disclaim any responsibility or liability for any damage caused during the construction and use of products based in whole or in part on the concept shown here. All information is provided for your use at your own risk.
–
02 Long Flap Board
Basic Info
- What is it: a board
- Material: strong | standard tolerance
- Dimensions: ~750x89x18mm all subject to standard tolerance
- Holes: Several, all in Ikego Grid and with a diameter of 6mm. See drawing for locations.
Get the part
- Buy: Available as local make
- Make: No instructions available
Meta
- Introduced by: Rinaldoo Boom
- Open: Shared under IPP 1.0
- Disclaimer: This part is just a concept and not fully tested. You should not assume that it works as indicated and I am not saying that it does. I disclaim any responsibility or liability for any damage caused during the construction and use of products based in whole or in part on the concept shown here. All information is provided for your use at your own risk.
–
03 Bench Board
Basic Info
- What is it: a rod
- Material: strong | standard tolerance
- Dimensions: Size wise this is board 050.1 with fully leveraged standard tolerance. Just with a different hole pattern
- Holes: 4 holes, diameter 6mm, in Ikego Grid. See drawing for locations:
Get the part
- Buy: Available as local make
- Make: No instructions available
Meta
- Introduced by: Rinaldoo Boom
- Open: Shared under IPP 1.0
- Disclaimer: This part is just a concept and not fully tested. You should not assume that it works as indicated and I am not saying that it does. I disclaim any responsibility or liability for any damage caused during the construction and use of products based in whole or in part on the concept shown here. All information is provided for your use at your own risk.